Mouse Guard LEGO display: ECCC

Last weekend at the Emerald City Comic Con, the Seattle based ArchLUG LEGO builder club put together an amazing display of scenes and architecture from the pages of Mouse Guard. The display was populated by minifig LEGO with Mouse Guard heads created by Guy Himber of Crazy Bricks. To the left you can see the group (minus a few who couldn't attend) and I at the display, and below are the photos I grabbed with buildings and scenes from Fall, Winter, Black Axe, and Legends of the Guard.

Mouse Guard Sculpture

Lockhaven

Midnight's Army at the gates of Lockhaven

Guardmice on the walls of Lockhaven

Celanawe, Kenzie, & Saxon watching Midnight's Army

Lockhaven

Lieam and the snake

Barstone

Barkstone

Barkstone

Inside the June Alley Inn

Streets of Barkstone

Carpenter squaring off lumber

Streets of Barkstone

A Mouse Thief?

Outside Barkstone's Gates

Crab attack on Calogero

Crab!

Sadie & Conrad against a Crab

Crab attack on Calogero

Bunny Caravan

Bunny Caravan

Lieam & Celanawe against the Owl 

Celanawe falls victim of the owl

Matriarch's Chamber

Matriarch's Chamber

Mice in the reeds

Leaf Boat

Leaf Boat

Celanawe & Em on duckback

Lower Port Sumac

The Mariner's Bell

Lower Port Sumac

Upper Port Sumac: The Drupe

Shorestone Exterior

Shorestone Interior

Shorestone main entrance

Shorestone

Haven Guildroom

Shorestone

Big thanks to builders Alice Finch, Paul Hetherington, Dave & Kelli Smith, Thomas Garrison, Daniel Fortine, Bob Weiss, RJ Coughlin, Steve Walker, Scott Fowler, Dan Sabath, Sean Edmison, Anu Pehrson, David Frank, Thorin Finch, Shawn Snyder, Jim Edelen, Michael Kuroda, Dave Ingraham, & Guy Himber

2015 Appearances:

Trolls and Legends Festival Mons, Belgium April 3-5

C2E2 April 24-26

FCBD: Jetpack Comics NH: May 2nd

Motor City May 15-17

Denver Comic Con May 22-25

Heroes Con June 19-21

San Diego Comic Con July 8-12

Long Beach Comic Con: Sept. 12-13

Baltimore Comic Con Sept. 25-27

New York Comic Con Oct. 8-11

Art-Bubble Comics Festival: Copenhagen: Nov. 14-15

2015 Bookplate process

For the last 3 years I've released a limited print designed to be a bookplate for your books (Mouse Guard or otherwise). In years past I've used some type of process other than inked linework & digital color to create the image for the bookplate. I've done block printing, faux stained glass, faux embroidery, and for this year, I made a real* mosaic. To the left you can see the final bookplate design, but below I'll run through the process for making the piece.

I started with a sketch I refined in photoshop (adding color cues & an elaborate background design) that I printed out and glued to a piece of chipboard (the stuff the backs of sketchpads are made of). Then I started the slow-and I do mean slow-process of cutting up little 'tiles' of chipboard and gluing them down to the mounted printout with super-glue. To fit into some of the stranger places, I'd refine the tile shapes using a hobby knife. 

Because I didn't pre-paint the chipboard tiles (there was too much chance for loss or over production of any given color), when I'd get a section of color finished, I'd paint those glued down tiles with acrylic paint. Going one color at a time made it easy to not get lost in the process of re-figuring out which tiles needed to be which color. I'd make small color variances within each area so the piece looked like it was made up of imperfect tile bits rather than looking painted or photoshoped to be one flat color.

The process took much longer than I thought and over the course of two days I gave myself a bad arm cramp and a knot in my back and neck from leaning over the detailed tile bits for so long. It was a major relief on the last day when I was filling in the small areas of the background, though I had more accidental gluings, chipboard de-laminating, and lost custom cut pieces in the last few hours than I did on the whole project. 

Once the tiles were all glued down, I sprayed several clear coats of sealer over the entire piece. When that dried, I crossed my fingers as I mixed up custom grout, and rubbed it into the gaps between the tiles, obscuring the mosaic in the the process with thick muddy grout. Then I started wiping away the grout from the surface, hoping this roughness wouldn't chip tiles, peel paint, or just plain not come off. Ultimately, only two tiles had any damage from the grout process and to the left you can see the final mosaic.

Unfortunately, it didn't read well as a small image, so I made a lot of adjustments in photoshop for the final bookplate file. Here again is the final image. These will all be signed and numbered as a limited edition. The first convention I'll have this bookplate in-hand for is Emerald City Comic Con this month. After that I'll start offering them through my online store.

2015 Appearances:

Emerald City Comic Con Mar. 27-29

Trolls and Legends Festival Mons, Belgium April 3-5

C2E2 April 24-26

FCBD: Jetpack Comics NH: May 2nd

Motor City May 15-17

Denver Comic Con May 22-25

Heroes Con June 19-21

San Diego Comic Con July 8-12

Long Beach Comic Con: Sept. 12-13

Baltimore Comic Con Sept. 25-27

New York Comic Con Oct. 8-11

Art-Bubble Comics Festival: Copenhagen: Nov. 14-15

Legends of the Guard Vol 3 #4 Cover Process

This week I'm sharing the cover to the final issue of Legends of the Guard Vol. 3 (I still have 1 cover to do for the Hardcover collection, but that's for a later blogpost). The final cover is shown to the left, but below is the process for the piece from concept to pencils through to colors. 

My original note to myself when I started this volume of Legends was: "#4: Insects crowning a mouse". The visual I had in mind then was much spookier and moodier, with misty dark blues in a foggy forest with a floor of scattered bones. But when it came time to draw this cover, I felt more whimsical and wanted the piece to feel more like a fairy tale. The mouse would be wearing a long cloak held up by some flying insect (I quickly thought moths were the right choice).  On copy paper, I sketched out the elements, doing some Google-fu to research types of moths and their markings as well as fireflies and even a caterpillar of one of the moth species.

I scanned those pencil drawings into Photoshop and started composing the cover's layout (keeping in mind where the fold between front and back cover is as well as where the logo is placed). For the background, I had a checkerboard pattern in mind already (I was thinking of is because of Edmund Dulac, one of my favorite illustrators, used it in his fairy tale illustrations often). I went in search of stock photos of stone arches that I could decorate with a checkered pattern and found an islamic facade that fit the bill. I modified the proportions, re-built the pattern and used it in several places the original photo didn't have it (including as the tile floor)

After that digital composite was built up with all the characters placed an background set, I printed it out at full size (8.25" x 16.25") and taped it to the back of a sheet of Strathmore 300 series bristol. On my lightbox, I was able to see the printout and use it as a pencil guide to ink on the bristol surface. Because I knew I wanted to push the background wall back with color to separate its business from the characters, I left a little space between the subjects and any of the background inks (other than where they meet the floor).

I scanned the inked artwork and started the process of establishing color areas called "flatting". The palate for the background was partly established by the original stock photo, but also by a few of Dulac's pieces I had in mind while working on this piece. The other colors were just put in as place holders as I filled in the spaces on the characters differentiating them from one another.


The final colors were achieved (after altering my flats to the palate that worked to keep the characters visible but looking like they belonged in the scene) by using the Dodge & Burn tools in Photoshiop and a textured brush. I added some effects to the fireflies to make them glow and some subtle rendering on all my color holds on the background and tilework.

Legends of the Guard Vol.3 #4 will have the full "legend" of this image on the inside front cover. And will feature stories by: Aaron Conley & Fabian Rangel Jr, Becky Cloonan, & Ryan Lang.

2015 Appearances:

Emerald City Comic Con Mar. 27-29

Trolls and Legends Festival Mons, Belgium April 3-5

C2E2 April 24-26

FCBD: Jetpack Comics NH: May 2nd

Motor City May 15-17

Denver Comic Con May 22-25

Heroes Con June 19-21

San Diego Comic Con July 8-12

Long Beach Comic Con: Sept. 12-13

Baltimore Comic Con Sept. 25-27

New York Comic Con Oct. 8-11

Art-Bubble Comics Festival: Copenhagen: Nov. 14-15